Cold-rolled steel strip products are one of the important products widely used in all walks of life in the economy, and are also the main products in our steel industry. The material properties, geometric dimensions and surface quality of cold-rolled strip products are the main indicators to measure their quality. Ceramic-To-Metal Vacuum Brazing Services  At present, the material properties and geometric dimensions of cold-rolled strip steel products can basically achieve satisfactory results, but with the continuous improvement of surface quality requirements in industries such as automobiles and home appliances, its surface quality has become a bottleneck that plagues many steel mills question. The Key Steps for Daily Maintenance of Vacuum Brazing Furnaces  Because the final surface quality of strip steel products will be affected by many links and factors such as equipment precision, process parameters, operating skills, production environment, storage and transportation, it is very difficult to improve and maintain its quality level. Many steel mills have also proposed the research topic of cold-rolled strip surface to improve the surface quality of strip steel and meet the increasing market demand of users.Flux-free Vacuum Brazing of Aluminum Alloys Most of the cold-rolled strip products need recrystallization annealing heat treatment after cold rolling to eliminate the work hardening produced during cold rolling, so that the strip can obtain good mechanical properties and surface quality. In large-scale production, there are usually two annealing methods of continuous furnace annealing and bell furnace annealing for cold-rolled strip steel rolled hard coils.Saw Hob Vacuum Furnace Application

DHG series electric blast drying oven is composed of box body, temperature control system and electric heating blast system.This series of products has the advantages of high temperature control accuracy, small overshoot, small fluctuation and deviation over-temperature protection. The Key Steps for Daily Maintenance of Vacuum Brazing Furnaces  In addition, an independent over-temperature protection system can be added as needed to improve the safety performance of the product.Close the door of the box, and the handle should be vertically downward. According to the degree of humidity of the items, adjust the damper to a suitable position. Vacuum Tempering Furnace Manufacturers and Applications The opening degree at "" is the smallest, and the opening degree at "3" is the largest (the adjustment range is 60 degrees).Turn on the power and the fan switch, the indicator light is on and the sound of the fan running can be heard; the fan must be turned on during use!Flux-free Vacuum Brazing of Aluminum Alloys The temperature controller enters the working mode after a self-test procedure of about 4 seconds, that is, the PV screen displays the measured temperature, and the SV screen displays the set temperature. When PVSaw Hob Vacuum Furnace Application

Jai shri ram🙏🙏 if the degree of lagna and lagnesh is less then it does not mean that the strength of the chart is less, this is a misconception so no need to worry. The concept that if the lagna and lagnesh degrees are close then the lagnesh is strong is true because the lagnesh will give full results of the bhava it is sitting in. So for ex - let us assume that if in this chart the lagnesh is sitting in the 10th house and it has identical degree with lagna then the lagnesh will give full results of 10th bhava .